Terminal Blocks for Al/Cu Conductors
KE Terminal Blocks for Al/Cu Conductors was launched only a few years ago and has already a significant impact on the market. Terminal Blocks has a wide application area including traditional panel building as well as the manufacture of machinery and equipment. Terminal Blocks product range covers all normal building construction needs. The terminals are suitable for both aluminium and copper conductors from 2.5 mm2 to 240 mm2. In addition, our Terminal Blocks series includes a 3 pole terminal block that supports a 3 phase system.
Electrical engineering, power engineering, industrial automatics are the areas where the necessity of connecting high-current power leads is often required. The system of mounting equipment on a DIN bus, commonly used in automatics, greatly facilitates installers work, it has been tested against durability and comfort of work. At the same time, it ensures very good after-market service of the used equipment. Damaged equipment can be quickly replaced with a working one, and such replacement does not cause a long down time, e.g. of a manufacturing line. As electricians say: "each equipment works more efficiently when it is connected to the mains". However, the problem is how to provide proper quality of such connection. The difficulty of this task increases proportionally with the increase of distributed currents intensity. One of the most reliable methods of fast installation of connection elements includes usage of screw terminals. Different variations of such terminals are commonly used starting from electronics to industrial automatics.